Smart Three Phase 15kva Ups
- MAXI
- GUANGDONG
- ≤100 units 25 days
- 100 units per month
MXD33 15KVA Feature:
This ups have applied full digital control technology based on DSP (digitized signal processor).The machine can run self-diagnose, and with standard RS232 for SNMP or RS485 cards, they are conveniently managed by remote monitoring.
1.DSP digital control technology
2.DC cold strat function
3.Pure-online double conversion technology
4.Powerful communication system
5.Low-power dissipation but high-efficiency
Model | 15K | |
Input | ||
Main input supply | ||
Rated voltage | 380VAC (Line voltage) /220VAC (Phase voltage) | |
Input wiring | 3Ф + N + E(Protective earth) | |
Voltage range | (165±5~275±5)VAC (Phase voltage) | |
Low voltage lose/recovery | (165±5) VAC / (180±5) VAC (Phase voltage) | |
High voltage lose/recovery | (275±5) VAC/ (260±5) VAC (Phase voltage) | |
Bypass | ||
Rated voltage | 380/220VAC | |
Input wiring | 3Ф + N + E (Protective earth) | |
Voltage range | (165±5~275±5) VAC (Phase voltage) | |
Low voltage lose/recovery | (165±5) VAC / (180±5) VAC (Phase voltage) | |
High voltage lose/recovery | (275±5) VAC/ (260±5)VAC (Phase voltage) | |
Input frequency | ||
Rated frequency | 50Hz/60Hz | |
Low frequency lost | 46Hz/56Hz | |
Low frequency recovery | 46+0.5Hz/56+0.5Hz | |
High frequency lost | 54Hz/64Hz | |
High frequency recovery | 54-0.5Hz/64-0.5Hz | |
Input performance | ||
Input power factor | 0.7 (185V、Linear full load ) | |
Generator input | Support (Generator rated power ≥ 2 UPS rated power) | |
Input current | ||
Rated current | 41A | |
Output | ||
Output power | ||
Rated VA/Watt | 15KVA/ 12KW | |
Rated voltage | 380VAC(Line voltage)/220VAC (Phase voltage) | |
Output voltage range | 200/208/220/230/240VAC (Output power reduces to 90% 208/200V) | |
Voltage regulation | ±2 % | |
THD V | ≤8 % | |
≤3 % | ||
Phase regulation | 120±1° | |
Voltage transient response | ≤9% (Linear load 0%~100%~0%) | |
Transient response recovery time | ≤60mS (Nonlinear load) recovery to 90% | |
Bypass before turn on | Yes | |
Model | 15K |
Crest ratio | 3 : 1 |
Output frequency range | |
Line mode | 46Hz~54Hz /56Hz~64Hz(The same as input frequency) |
50Hz/60Hz (Line frequency>(54Hz /64Hz) or line frequency<(46Hz/56Hz) | |
Battery mode | (50+0.1) Hz/(60+0.1) Hz |
Slew rate | 1 Hz/Sec |
Efficiency | |
Line mode | > 80% |
Battery mode | > 85% |
Overload function | |
Line mode/ Battery mode | Overload warning only; 105%±5%≤load |
2Min, then transfer to bypass and alarm; 105%±5%<load≤125%±5% | |
30S, then transfer to bypass and alarm; 125%±5%<load≤150%±5% | |
0.5S, then transfer to bypass and alarm; load>150%±5% | |
Automatically recovery | Yes |
Short protection | |
Line mode/ Battery mode | Cut off output after 3s |
Transfer time | |
Line mode to Battery mode | 0mS |
Battery mode to line mode | 0mS |
Line mode to Bypass mode | <1mS |
Bypass mode to line mode | <1mS |
Battery and Charger | |
Battery | |
Rated voltage | 192VDC |
Protection | |
Low battery alarm/recovery | (180.8V±4V)/ (188.8V±4V) |
Battery shutdown voltage | (176V±4V)/ (184V±4V)/Watt Value < 1000 |
(160V±4V)/ (168V±4V) /Watt Value≥ 1000 | |
Battery protection | |
Battery overcharge protection | (250V±4V) |
Battery detect | |
Battery missing | Support |
Battery failure | Support |
Charge | |
Float charge voltage | (220±2)VDC |
Charge time | Depending on the battery capacity |
Charge current | 10A ( Adjustable ) |
Interface | |
Alarm mute | Support |
DC boot | Support |
Auto Reboot | Support |
Alarm function | |
Battery mode | Beep once every 4 second |
Low battery voltage / Charger fault | Beep once every second |
Model | 15K |
UPS fault | Beep continuously |
Overload | Beep once every second |
Bypass | Beep once every 2 minute |
Communication interface | |
RS232/ RS485 | Support |
Output dry contact | Support |
Intelligent slot | Support SNMP/AS400 |
Supervisory software | Support |
Cooling way | |
Forced air cooling | |
Show | |
LCD+LED | |
Environment | |
Working temperature | 0℃~40℃ |
Altitude | <1000m |
Noise | ≤70dB |
Storage temperature | -15℃~45℃ |
Work humidity | 20% ~ 95% |
Standard | |
EMS/EMI | |
Anti-interference | IEC 61000-4-2.4.5 Level IV, IEC61000-4-3 Level III |
Conduction | IEC62040-02 |
Radiation | |
Safety | |
Safety | GB4943-2001/IEC62040-1 |
Mechanical properties | |
Connection | |
Input | Terminal blocks |
Output | Terminal blocks |
Battery interface | Terminal blocks |
Other function | |
60Hz | Support |
Frequency mode | Support |
ECO | Support(option) |
EPO | Support |
